Peter has been asking us about doing the final installation of the monitoring system for our house, so that he can get some data out of it (finally!). In order to make that happen, we needed to finish the electrical work, and that's been a bit of an obstacle because of various lighting needs and also because our electrical subcontractor, Andy Harkness, has been in high demand recently. But we managed to lure him and one of his electricians, Karl, up to the house over the past two days to finish up the electrical work.
Imagine my excitement when Andy called me down to say "Ted, can we combine any of these circuits? The panel's full!" It turns out that we are able to keep all the circuits separate, at the cost of having _zero_ free space in the panel. If we need to add even one more circuit, we'll have to add a secondary panel.
Why so many circuits? Peter wants to be able to measure the power consumption patterns of individual devices and rooms. Along with the per-room temperature sensing and an outside weather station, this will give him (and us!) a really good idea of how the house is actually performing.
The snarl of wires coming out of the wall here are the wires to individual temperature sensors in each room, all of which terminate in the utility closet. There's also network wiring, of course—that's the other, smaller snarl of wires.
This is the control/status monitoring panel for the solar hot water. We may collect some data off of this as well.
This is a flow meter that will detect the flow rate of the hot water. We also want a flow meter for the glycol, but had some trouble sourcing one that would be reliable—Peter originally sent us a flow meter that's mostly made of plastic, and Gary, our solar subcontractor, took one look at it and refused to install it. When I called Peter about it, he told me that there had actually been some problems with the device in the field (nothing serious—one leaked a tiny bit, and another failed after a year). So we aren't installing this particular device—Peter's researching other options.
Oh, the reason for the weird bend in the pipe that comes into and out of the hot water flow meter is that we need a certain length of pipe after a bend or a valve before the flow meter, or the turbulence caused by the water flowing around the bend or through the valve will affect the measurements.
This is the flow meter for the well. We're not actually measuring this—it's just used by the sewer department for billing. But it's a meter, so I included it... :)
A gratuitous picture of fall foliage..
The spiral stairs, from above...